CRY2623M Fixed Acoustic Imager
CRY2623M Fixed Acoustic Imager
CRY2623M Fixed Acoustic Imager uses microphone array beamforming technology to obtain sound source distribution data, and cooperates with high-definition cameras to capture video images in real time. It can help users realize remote monitoring system based onlocal network (LAN, etc.), wide area network (WAN, ADSL, 4G and private network, etc.), and help users realize industrial digital transformation, and support remote real-time monitoring of video images. As such, this provides facilities with further insight into product quality or safety issues, as well as the ability to rapidly detect them. Changes to compressors, pumps, pipes, cables, etc. can be understood in real time and in advance, rather than manually.
Features
Features
- 128 digital MEMS microphones
- 24/7 Real-time monitoring
- Small size easy to install
- Early detection of equipment problems
- Find faults that cannot be found
- Factory automation product inspection & Alarms
Intelligent Inspection System
The CRY2623M can also be used as a payload for inspection, including UAV, robot, car or other mobile unit, Realizingmore intelligent inspection and monitoring applications.
Online Monitoring System
Fix CRY2623M acoustic imaging module in certain key areas, and achieve a full range of 7X24 hour fault monitor and alarm. Give you real-time, accurate information about the status of your equipment and instant notification of equipment failures.
Usage Scenarios
Priority areas containing dangerous gases. Key areas with a high probability of fault in complex pipelines. Key areas for testing that are difficult for inspectors to reach.
Technical specification
Main Technical Specifications
| Device Model | CRY2623M |
| Number of Microphone Channels | 128 channels |
| Test Frequency Range | 2kHz ~ 48kHz |
| Port | RJ45 |
| Data communication | RTSP/RTMP streaming transmission |
| Camera Resolution | 800W |
| Frame Rate | 25FPS |
| Test Distance | 0.5~50m |
| Weight | About 1.3kg |
| Size | 183mm X 169mm X 85.35mm |
| Storage | 8G internal storage, 64G TF card expansion storage |
| Operating Temperature | -10℃~+50℃ |
| Supply Voltage | DC12-20V |
| Power Consumption | About 14W |
| IP Degree of Protection | IP56 |
| Fixed way | Bottom 1/4 -20UNC thread/M5 screw fixing |
| Explosion-proof certification | CNEX |
Intrisically Safe Power Supply
| Intrinsically safe maximum open circuit voltage | DC 6.5V |
| Intrinsically safe maximum output current | 2.0A |
Digital Signal Barrier
| Explosion-proof parameters | Um=250V AC/DC, Uo=6V, Io=505mA, Po=0.75W IIC: Co=28μF, Lo=0.12mH |
| Operating voltage | 5V |
| Maximum withstand voltage | 6V |
| Terminal resistance | 12Ω |
| Polarity | Daul polarity |
| Weight | About 110g |
| Applicable equipment wiring | Two-wire, three-wire, four-wire |
| Explosion-proof certification | Zone 0, Zone 1, Zone 2; IIA, IIB, IIC, T4-T6 |
| Environment conditions | Continuous use temperature -20℃~60℃； Storage temperature -40℃~80℃ |
Acoustic Imaging Guardian Minimum Leakage (Pressure 0.5 Mpa, 20-40kHz site environment noise 40dB)
| Distance to Sound Source (m) | Leakage CCM (±1) |
| 0.5-2 | 28 |
| 2-4 | 46 |
| 4-6 | 47 |
| 6-8 | 50 |
| 8-10 | 53 |
| 10-12 | 66 |
| 12-14 | 70 |
| 14-16 | 78 |
| 16-18 | 90 |
| 18-20 | 97 |
CRY2623M
Features
Technical specification
More Products
More Products
CRY8124 Acoustic Imaging Camera
CRY2620 Industrial Acoustic Imager (Basic Version)
CRY2623 Industrial Acoustic Imager (Superior Version)
CRY2624 Industrial Acoustic Imager (ATEX Version)
